Pipe Fittings (Domestic)

Quality Standard & Specifications

'MG'brand pipe fittings are being manufactured as per standards laid by bureau of Indian Standards specifications as per IS:1879/2010 part (I to X). The firm is manufacturing complete range of pipe fittings being used for Water Line installation with a minimum working pressure of 300 lbs/inch2 or 21.42 kgf/cm2 hydraulically. Our pipe fittings withstand minimum working pressure of 2.1 mpa equalant to 21 bars hydraulically. 'MG' Brand pipe fittings are normally manufactured from 1/4" to 6" sizes.

'MG' Brand pipe fittings are manufactured under strict quality control by a team of highly qualified & experienced engineers, equipped with most up-to-date machinery and sophisticated laboratories. The material is manufactured as per dimensions laid down by Bureau of Indian Standards with their latest amendments which are as under :-

(I) DIMENSIONS :

Malleabel Cast Iron pipe fittings as per IS : 1879-2010 (Part I to X)

(II) FINISH :

Hot dip galvanzied as per IS : 2633-1986, IS ; 6745-1972 and IS 4759-1996. Minimum Zinc coating 610gm/m²

(III) MATERIAL SPECIFICATIONS :

Black heart malleable cast iron as per IS : 14329-1995 Grade BM300

(IV) THREADS :

As per IS : 554-1999/ISO 7.1:1994 both parallel & taper.

To ensure high quality & correctness of raw material as well as semi finished material, various tests are performed. The following chart shows Chemical Composition & Physical Properties of 'MG' Brand pipe fittings.

Chemical Composition

CARBON (C) : 2.5% to 2.7%

SILICON (Si) : 1.00% to 1.10%

MANGANESE (Mn) : 0.3% to 0.35%

PHOSPHORUS (P) : 0.12% to 0.15%

SULPHUR (S) : 0.05% TO 0.08%

Physical Properties

BRINELL HARDNESS : 150 BHN Maximum

TENSILE STRENGTH : 33 to 36 kg/mm² or 325 to 350 mpa

PERCENTAGE ELONGATION : 6 to 12%